Φ8.0 Series External Fixation Fixator – Tibiaaxis Unilateral Frame

(This frame is for reference only, the actual surgery depends on the fracture).

Frame detail:

Put two 5mm bone screws into the distal and proximal ends of humerus in a parallel needle layout. Mount the coupling X and connect each two 30° struts to it. Then use four rod to rod couplings VII and two Ф8 L250mm connecting rods (straight type) to connect all the components into a frame and finally lock. (In the operation, the needle block X should be used as a guide for the parallel layout of the bone screw) (For a more stable frame, use one two-bar clamp VII and one Ф8 L200mm connecting rod (straight) for lateral connection between the two connecting rods.)

Features:  
1. Easy to operate, flexible combination, can build a three- dimensional stable external fixation system.
2. According to the adaptation symptoms, the stent can be freely assembled during the operation, and the components can be added to the frame at any time.
3. PEEK fix clamp help reduce the overall frame weight.
4. PEEK fix clamp has low developing degree, easy operation.
5. Carbon fiber connecting rod build elastic frame, to reduce stress concentration.

Recommended configurations:

Product Image	Order Code.	Product Name	Specification (mm)	Qty
	20.10.0108250.300	Connecting rod(straight)	Ф8,250mm	2
	20.20.0708201.400	Rod to rod coupling VII	2 holes Ф8	4
	20.20.1008501.400	Coupling X	5 holes Ф5	2
	20.30.0308101.400	30° Post	Ф8	4
	19.32.513.0501501	Bone screw	Ф5.0x150mm	4