Φ8.0 Series External Fixation Fixator – Tibia Frame

(This frame is for reference only, the actual surgery depends on the fracture).

Frame detail:

In the parallel layout,put two 3mm bone screws in radius shaft at the proximal end, and put two 3mm Bone screws in the second metacarpal at the distal end. Mount the coupling X at both ends and connect by two 30 ° struts each. Then use four rod to rod couplings VII and two Ф5 L200mm connecting rods (straight type) to connect all the components into a frame and finally lock. (In the operation, the needle block X should be used as a guide for the parallel layout of the bone screws.

Features:  

1. Easy to operate, flexible combination, can build a three- dimensional stable external fixation system.
2. According to the adaptation symptoms, the stent can be freely assembled during the operation, and the components can be added to the frame at any time.
3. PEEK fix clamp help reduce the overall frame weight.
4. PEEK fix clamp has low developing degree, easy operation.
5. Carbon fiber connecting rod build elastic frame, to reduce stress concentration.

Recommended configurations:

Product Image	Order Code.	Product Name	Specification (mm)	Qty
	20.10.0105200.300	Connecting rod(straight)	Φ5,200mm	2
	20.20.0705201.400	Rod to rod coupling VII	2 holes Φ5	4
	20.20.1005401.400	Coupling X	4 holes Ф3	2
	20.30.0305101.400	30° Post	Φ5	4
	19.32.513.0300801	Bone screw	Φ3.0x80mm	4