Φ8.0 Series External Fixation Fixator – Humerus Backbone Frame

(This frame is for reference only, the actual surgery depends on the fracture).

Frame detail:

Put 4 mm Bone screw in the humeral shaft in a parallel needle layout, put the proximal Bone screw on the side of humerus, and the distal Bone screw on the side or back. Two pin couplings X are mounted, and insert two 30° struts into the coupling X in an inverted "V" shape. Then use two rod to rod couplings VII and one Ф8 L250mm connecting rod (straight type) to connect all the components into a frame and finally lock. (In the operation, the coupling X should be used as a guide for the parallel layout of Bone screw).

Features:  

1. Easy to operate, flexible combination, can build a three- dimensional stable external fixation system.
2. According to the adaptation symptoms, the stent can be freely assembled during the operation, and the components can be added to the frame at any time.
3. PEEK fix clamp help reduce the overall frame weight.
4. PEEK fix clamp has low developing degree, easy operation.
5. Carbon fiber connecting rod build elastic frame, to reduce stress concentration.

Recommended configurations:

Product Image	Order Code.	Product Name	Specification (mm)	Qty
	20.10.0108250.300	Connecting rod(straight)	Ф8,250mm	1
	20.20.0708201.400	Rod to rod coupling VII	2 holes Ф8	2
	20.20.1008501.400	Coupling X	5 holes Ф5	2
	20.30.0308101.400	30° Post	Ф8	2
	19.32.513.0401201	Bone screw	Ф4.0x120mm	4